Flame Spray Gun
Oxygen-fuel flame spray gun for wire and powder materials. Versatile, portable, cost-effective.
Home / Coating & Metallizing Guns / Flame Spray Gun
Machine
Oxygen-fuel gas flame spray gun
Use
Restoration, wear resistance, corrosion protection
Industry
Paper mills, steel plants, marine, general industry
How It Works
Wire or powder is fed through an oxygen-fuel flame that melts it, then compressed air atomizes and propels the molten particles onto the surface.
Versatile thermal spray system for applying a wide range of coating materials including zinc, aluminum, stainless steel and carbides.
Technical Specifications
| Materials | Wire, powder, rod |
| Flame Temp | 3000°C |
| Deposition | 5-15 kg/hr |
| Gas | Oxygen + Acetylene/Propane |
Also needed for this job
Screw Air Compressors (CK & XL Series)
Rotary screw compressors, 10-175 HP (CK 10-50, XL 60-175), for blasting, painting and plant air. Permanent-magnet motor, 1:1 drive, 10 bar. Boss resale.
Blast Pot 500L (Model 501-R)
Large pressure blast pot with 500L metallic capacity, 230L sand capacity, 11-15 sq.m/hr cleaning rate. Workhorse for heavy industrial use.
Surface Profile Gauge
Dial-type surface profile gauge for measuring blast profile depth on metal surfaces.
Coating Thickness Gauge (Magnetic)
Magnetic induction gauge for measuring non-magnetic coatings on ferrous substrates.
Electric Arc Spray Gun
Electric arc metallizing gun for zinc, aluminum and other metal coatings. High deposition rate, low cost.
HVOF Gun (High Velocity Oxygen Fuel)
High-Velocity Oxygen Fuel gun for dense, hard coatings with excellent bond strength.