Blast Nozzle Holder (Polyurethane + Steel)
Nozzle holders and retainers that lock the blast nozzle onto the hose. Polyurethane and steel sizes for 19-38 mm blast hose.
Home / Spare Parts & Consumables / Blast Nozzle Holder (Polyurethane + Steel)
Machine
Blast nozzle holder / retainer coupling
Use
Secure the nozzle to the blast hose on portable pots and cabinets
Industry
All sand blasting and shot blasting operations
How It Works
Thread or clamp the holder on the hose end, seat the nozzle with the O-ring, then lock with the pin or nut. Air and abrasive then pass through the nozzle only.
The holder sits between blast hose and tungsten carbide nozzle. A tight seal stops leaks and keeps the nozzle from blowing off under pressure. Stock both light polyurethane and steel holders so crews can match hose ID and job duty.
Technical Specifications
| Types | Polyurethane + steel |
| Fit | 19-38 mm hose ID |
| Seal | O-ring |
| Lock | Pin / thread |
| Use | Pressure blast pots |
Also needed for this job
Blast Pot 500L (Model 501-R)
Large pressure blast pot with 500L metallic capacity, 230L sand capacity, 11-15 sq.m/hr cleaning rate. Workhorse for heavy industrial use.
Screw Air Compressors (CK & XL Series)
Rotary screw compressors, 10-175 HP (CK 10-50, XL 60-175), for blasting, painting and plant air. Permanent-magnet motor, 1:1 drive, 10 bar. Boss resale.
Copper Slag Abrasives
Copper slag abrasive for aggressive surface preparation. Hard, angular, cost-effective for large areas.
Blast Suit (Apron + Hood)
Protective blast suit with leather apron and air-supplied hood for operator safety.
Tungsten Carbide Blast Nozzle
Tungsten carbide blast nozzle for long life and consistent blast pattern.
Blast Hose (Rubber, 19mm ID)
Heavy-duty rubber blast hose with conductive lining for safe, efficient media delivery.
Technical guides · Sandblasting services · Hose pressure drop · Pop-up valve faults